Important Rules
No Smoking Inside :
To keep the air fresh and clean for everyone, please refrain from smoking inside the tent or the vehicle.
Furry Friends :
We love pets, too! If you're thinking about bringing a four-legged companion along please let us know so we can prepare the vehicle to make it better suited for pets and keep it cleaner.
Tidy Spaces :
Before you wrap up your adventure, make sure to empty all your trash, food, and water from the car and equipment. Let's leave no trace behind and keep the great outdoors beautiful.
Clean Dishes, Happy Campers :
A small task for a big impact! After creating your culinary masterpieces, please take a moment to wash the dishes and all cooking hardware. It keeps everything in tip-top shape for the next explorers.
Respect the Wild :
Embrace the Leave No Trace principles. Be mindful of the environment and wildlife. We're guests in their home, after all!
Remember, these guidelines help us ensure a fantastic experience for everyone. If you have any questions, don't hesitate to reach out. Happy trails!
Where to drive
We think the best way to explore British Columbia’s natural beauty, small towns, and wildlife is the open road. Here are some tips to help you make the most out of your vacation and avoid issues
Every country has its own set of driving laws, and Canada is no different.
Here are five local traffic laws that you should be aware of before driving in Canada.
Canadians love STOP signs. Four-way stops are particularly common, with drivers taking turns to advance.
Cars and pedestrians use junctions at the same time. If you’re turning left or right, wait for pedestrians to cross
It is permitted to turn right on a red light, though watch pedestrians crossing.
U-turns are technically illegal. Avoid making U-turns in cities.
Traffic tends to come to a firm stop to allow emergency vehicles to pass. Watch out for the car in front of you
Highways and city streets
Forest Service Roads
Forest Service Roads or Resource Roads are constructed to develop and protect BC's natural resources. They're used primarily by industrial vehicles but they also provide access to campgrounds and recreational sites.
-
Most Forest Service Roads have gravel surfaces and are narrow (often one lane wide).
-
There may be roadside brushes limiting visibility, soft shoulders, and little to no ditch.
-
Forest Service Roads will have tighter curves and may be much steeper than highways.
-
Forest roads might not have signs identifying hazards at dangerous or steep road sections.
-
The recommended speed on service roads is 30 KM/H
Yield to industrial traffic !
Large industrial vehicles can't maneuver as quickly as passenger vehicles - give these vehicles extra room so workers can safely do their job. As a cautionary approach, follow industrial vehicles at a safe distance - watch them, slow down and pull over if they do.
This interactive map shows all known conditions updates for Forest Service Roads in BC. Check out the interactive map here.
Where not to drive
This vehicle is equipped to travel safely and reliably on unpaved roads, however, IT IS NOT MEANT FOR OFF-ROADING
While some forest service roads may be well-graded and gravel-covered, others can be more rugged and resemble off-road trails.
The conditions of these roads can vary depending on their designated use and maintenance. It is your responsibility to avoid excessively challenging terrains such as extremely steep inclines, rocky cliffs, deep mud, or hazardous trails.
If you are not sure about navigating a specific road during your trip, feel free to contact us. We'll be happy to provide guidance and assistance to ensure a smooth and informed travel experience.
We encourage you to explore the backcountry and take the scenic backroads however we don’t want you to get stuck or damage the vehicle. If you drive off-road and get stuck or damage the vehicle you will be responsible for any expenses related to the damage (vehicle, tires, paint scratches, etc,), as well as recovery charges and any additional expenses related to getting the rental vehicle back.
To ensure a smooth journey always follow these six rules
Wildlife Aware!
While Driving
British Columbia has the most comprehensive inventory of wildlife warning signs in the world!
Watch for the wildlife warning signs, which are posted at areas where experience shows animals are likely to be on the road
Some additional ways you can avoid hitting wildlife:
-
Be extra careful in the early morning or at dusk and during the night. These times are when animals are most likely to be on the road.
-
Slow down and look ahead into the ditch for movement or for the reflection of animal eyes in your headlights.
-
Some animals, especially deer, may panic when they see your headlights and may freeze in the road. If you see an animal, slow down until you are well past them.
-
Moose will often attempt to escape from a car by continuing to run along the road. This may pose a hazard to other drivers. If it is safe to do so, pull over or slow to a very low speed until the animal leaves the road.
-
Many animals travel in groups. If you see one on the road, slow down - there may be more following.
-
In the summer many young creatures become more mobile, and they are likely to join their parents crossing the road to find new habitat.
Visit Routes and Conditions for more information about driving in British Columbia
While Camping
-
Inspect the area around your campsite, check for bear signs (scat, claw marks on trees, fresh digging or tracks). Report any signs to campground staff. Be especially cautious if you find scat with evidence of plastic or other garbage.
-
Bears have long memories.Your campsite may be clean now but if a bear found food there earlier, it may be back, so always be vigilant.
-
Store attractants (food, toiletries, bug spray or anything that has an odour) inside the vehicle and never in your tent. Use food lockers if provided.
-
Cook in clothes other than those you will sleep in.
-
Dispose of grey water in designated areas or at least 50 m from your sleeping area.
-
Prepare food away from sleeping areas.
-
Dispose of garbage and recyclables promptly at designated sites.
-
Campsites should be free of all attractants whenever you are not present, even for short periods of time, or when you are sleeping.
-
NEVER feed any wildlife. This includes smaller animals like squirrels, birds and raccoons. The feed that attracts them is also a powerful attractant for bears and other predators.
-
Never leave pets unattended or outside at night. They can attract predators. Always keep them on leash except in designated off-leash areas.
-
Listen to park and campground staff. Their goal is to ensure you have a safe and enjoyable camping experience.
Knowing your Vehicle
Your vehicle drives on regular gasoline with a minimum octane rating of 87
USING THE CRUISE CONTROL
The cruise controls are on the steering wheel
Press the button to put the system in standby mode.
Drive to the speed you prefer.
Press the toggle button upward or downward to set the current speed.
Take your foot off the accelerator pedal.
To cancel simply press the brake pedal or the X button
USING THE LANE KEEPING SYSTEM
Alert Mode: The lane keeping system alerts you by vibrating the steering wheel if you drift off your lane
Aid mode: The system provides a small steering input to the vehicle towards the center of the lane.
Alert and aid mode: uses multiple features to keep you in your lane. The system first provides a small steering input to bring your vehicle back towards the center of the lane. If your vehicle moves too far from the center of the lane the system alerts you with vibration in the steering wheel.
ELECTRIC PARKING BRAKE
The electric parking brake switch replaces the conventional hand brake. The switch is on the center console. To apply the electric parking brake, make sure the transmission is in park (P) and then pull the switch up. Your vehicle automatically releases the parking brake when the vehicle is shifted into gear.
USING THE DRIVE MODE CONTROL
Selectable drive modes change various electronic and mechanical settings within your vehicle to tailor its performance and driving characteristics to driving conditions.
Normal
For everyday driving.
Eco
For a more fuel efficient driving.
Tow/Haul
For improved transmission operation when towing a trailer.
Slippery
For less than ideal road conditions, such as snow or ice-covered roads.
Sand
For off-pavement driving through deep soft dry sand
Mud/Ruts
For driving through muddy, rutted or uneven terrain.
USING THE TRAIL CONTROL
Trail control lets you focus on steeringduring low-speed use by controllingyour vehicle's acceleration and brakingto maintain the speed that you set.
Press the button to turn the system on and off.
Drive to the speed you prefer (Max 30KM/H).
Press the toggle buttons on the steering wheel upward or downward to set the current speed.
Take your foot off the accelerator pedal.
The AWD Lock and rear electronic locking differential features are not intended for use onpavement which could subject your vehicle to excessive stress, and result in damage
When one or more of your tires are low, your vehicle illuminates the low tire pressure warning light in the instrument cluster. If this happens, stop and check your tires as soon as possible. Inflate them to the proper pressure.
Should you need to change a tire on the road, the vehicle jack; tool bag and an instruction guide are behind the rear seat of your vehicle.
USING THE TOUCHSCREEN
The status bar on the top of the screen contains the home button, clock, outside temperature and status bar icons that inform you about the system. The feature bar allows you to select system features, like audio and settings. For your safety, some features are speed-dependent. Their use is limited to when your vehicle speed is less than 3 mph (5 km/h).
CONNECTING A DEVICE
1-Make sure Bluetooth® on your device is switched on.
2-Select the settings options on the feature bar.
3-Select Bluetooth.
4-Switch Bluetooth on.
5-Select Add a Bluetooth Device. A prompt alerts you to search for your vehicle on your device.
6-Select your vehicle on your device. A number appears on your device and on the touchscreen.
7-Confirm that the number on your device matches the number on the touchscreen. Thetouchscreen indicates that you have successfully paired your device.
STREAMING BLUETOOTH® AUDIO
Once your device is paired you can stream Bluetooth® media.
-
Select the audio option on the feature bar.
-
Select Sources.
-
Select the Bluetooth option.
APPLE CARPLAY AND ANDROID AUTO
To use Apple CarPlay and Android Auto simply connect your device to a USB port and follow the instructions on the touchscreen.
Android Auto may need to be enabled from the settings menu.
Setting up the tent
Setting up the rain cover(optional)
Folding the tent
Using the kitchen equipment
silicone closure system that can be used as a trivet
frying pan with 1 foldable, locking handle (push to lock)
4 plates and 4 sets of cutlery (fork, spoon, knife)
Lid that fits the pot and pan and can be used as a strainer
graduated pot with 2 folding handles
After using it, wash the parts in soapy water (preferably warm),then dry them before storing in the bag
Optimizing the Cooler
Start by placing a layer of ice at the bottom of the cooler.
Follow this with a layer of items to be chilled, and then add another layer of ice.
Repeat until the cooler is full, finishing with a layer of ice on top.
Put your food in the watertight containers provided if you don’t want it to get wet
Minimize the empty space in the cooler, as air space can lead to faster ice melting.
Limit the number of times you open the cooler.
Each time you open it, warm air enters, and cold air escapes, reducing the effectiveness of the ice
Keep the cooler in a shaded area to avoid direct sunlight, which can significantly increase the internal temperature of the cooler
Regularly check the ice level and replace melted ice with fresh ice as needed. A well maintained ice level ensures continued cooling efficiency
Setting up the stove
Fig. 2 Press on the latch to open the lid
Fig. 3 Position wind baffles by Inserting the wire clips into slots.
Fig. 5 Close both burner valves firmly.
Remove regulator from storage position under grate and inspect gasket on the stove connection before use
Fig. 6 Screw regulator into stove hand tight
Fig. 7 Remove plastic cap from top of propane cylinder and screw propane cylinder into regulator hand tight.
Fig. 11 Hold a match near burner and open burner valve.
Fig. 12 Adjust flame with burner valves.
Flame should be blue with a hint of yellow on tips.
Turning off :
Close the burner valves firmly.
Remove propane cylinder from regulator and replace plastic cap on cylinder
always clean the stove with a damp cloth before storing
Unscrew regulator from stove and place in storage position under the grate
